Home improvement

Why You Can Rely On The Spa Test Strips Entirely To Check Your Spa And Pool Water Chemically

Do you have a spa or a pool at home or in your business? You may already know that keeping the water clean and fresh is a hassle but a necessity. This is why we are here to offer you the best solution for checking the chemical composition of your pool water. Make sure you read this guide to the end to know the best use of these test strips that we are suggesting here. 

When technology keeps growing and evolving every day, spa test strips are ideal and preferred over liquid test kits or photometers. It is because of the accuracy and ease they offer when testing the pool and hot tub water. In addition, anyone may use them without needing the addition of chemicals when trying. 

Regularly testing the pool water is a cost-effective means to avoid all kinds of distances by promptly acting on the slight imbalances. It is also the ideal way to maintain an aesthetic appeal to your pool. However, if you do not take well care of the pool, the water may have a diminished pH level that may destroy the pool pump and also cause corrosion on the ladders. 

But luckily, by having BOSIKE spa test strips with you, you can protect yourself and your guests from getting open to pool-borne illnesses. And not only that, but you may also use the strips for bath, spa, hot tub, and other water chemistry testings. It is also suggested that you test your pool and spa two times a week to monitor the water conditions properly. 

How to test the pool water using the test strips?

You must run your pool pump for more than an hour before performing this spa test strips hot tubs chlorine test to achieve the ideal results. Then, you have to follow these simple steps to test the pool. 

  1. Immerse the test strip into the pool water and let it be there for only 2 seconds. 
  2. Remove it out of the water using pads facing over the top. Do not shake the excess water that is on the strip 
  3. Hold it there for fifteen seconds in this position 
  4. Make a comparison to the legend and then match the colors and observe them to the corresponding values 
  5. After reading these values, you may figure out how to balance off these chemical levels needed. 

How often should I use the spa test strips for hot tub chlorine?

While there isn’t any standard time frame to perform these water hardness test strips, some people perform these tests daily while others do it twice a week. All of these are acceptable. But if you wish to be over the safe side, you may use them as per the following given schedule:

  1. Testing for chlorine: two to three times a week 
  2. pH: two to three times every week 
  3. acidity: anything the pH levels require any adjustment 
  4. alkalinity: every week, unless the pH has changed recently 
  5. calcium hardness: at least once a month
  6. cyanuric acid levels: at least once each month 
  7. total dissolved solids: at least once every month 

Why spa test strips matter, and why should I test the water?

Swimming is no fun when water is not clean, clear, and healthy. Unfortunately, in many cases, pools are used by many people at a current time. So it is essential to test and treat the pool water very regularly to make sure the infectious illnesses are not spreading. Plus, it also helps to boost the entire pool experience and make you have a good swim. 

So how can you take pool water samples for spa test strips for hot tubs chlorine?

When testing the pool water, it is essential to take a proper example to get accurate results. It would help if you considered many factors, such as taking the pool water samples and how you are doing it. Take the water sample right from the middle of your swimming pool if possible. Take the pool water sample by the following steps:

  1. use a clean bottle or a cup
  2. hold the cup of the bottle upside down, making sure the opening faces the pool floor 
  3. insert the cup or bottle into the elbow-deep water 
  4. turn the broth or cup straight up for a compelling collection of water sample

What are the things I must keep note of when I am buying spa test strips?

When choosing the pool test strips, you must not forget to read the product reviews and customer testimonials. You also have to consider the following factors to make sure you end up with the right product for the swimming pool you have. 

1. Ease of use:

Look for testing strips that are very easy to use. They must offer a simple testing process to save time for you but give accurate results. Beware that a few products come with very dull colors on the strips. This makes it very hard for you to compare to the color-coded chart. 

2. Consistency:

If there is consistency in the test results, the testing strips also give similar results when you have checked the pool many times. In addition, these results must give consistency when other pool test kits are being sued. 

3. Accuracy:

Accuracy is another significant factor that you must look out for when it comes to pool testing strips. Besides ease of use and consistency, accuracy allows you to have confidence in the results. This also makes sure that your swimming pool is well balanced. So you may swim in it without any worries. 

4. Suitability:

Pool test strips are designed to test the pool’s water quality super quickly. They offer many different ranges of tests; based on the type of test. First, you need to try out the spa test strips on your spa or pool water. Then, you can find the 4 way or 6-way test kits on the market. Plus, not all of the water quality is the same. So you have to consider the suitability as well. 

5. Design:

Checking the product design allows you to ensure that you get super high-quality test strips. This means that you must check whether the test strips are enormous enough to give you a comfortable grip while you dip the spa test strips for hot tubs chlorine into the water. You also need to check the bottle or pack which holds the strips. It must protect the strips against degradation because of the moisture or UV rays. 

How must I store the pool test strips?

Ensure that you have good storage for the swimming pool test strips. Please put them in the packing and also seal them correctly to prevent any contamination. If the strips sit out in the sun the whole day, you will not get any correct readings. Keep them stored in a room no greater than 85 degrees F. Hence rest assured that the readings will be accurate. 

Whether you have a spa or a swimming pool in your home or business, you have to make sure that you are regularly checking the water quality. You must make sure that it is clean at all times. It will ensure that anyone who dives into the water remains safe, and also the pool materials stay safe. It enhances your swimming experience all in all. 

These strips by BOSIKE are perfect to be used as jacuzzi test strips or hot tub test strips. They can be made to suit any of your requirements of water checking so that you can keep your skin and your swimming experience safe and fun. 

You can use these strips in a schedule or when you think the water seems too dull or harsh on the skin. You never know what has gotten in that pool or spa water; hence checking it regularly is a must. These test strips can be found anywhere in the stores and can be bought online. The way they are so well priced makes them the most popular form of checking the water hardness compared to the Clorox water hardness test strips. 

You will need many of these strips; hence going for expensive checking water methods may be too expensive for you. But, on the other hand, if you are using the pool or your spa too much and keep checking its chemical composition now and then, you must move to these affordable strips and are also very easy to use. 

Only take out a few minutes of your day and check the water alkalinity and pH so that whenever you dive, you get the best experience that you expect from your pool on a hot summer day.

About the author

Donna Medley

Add Comment

Click here to post a comment

three × one =