This is a question that everyone is very concerned about when choosing a shower room. In recent years, there have been news of shower glass explosions. 3‰ glass spontaneous breakage ratio after glass is installed. This means that if we unfortunately become the three of a thousand people, isn’t it a tragedy? Therefore, some unscrupulous businesses began to create public opinion: the thicker the shower glass, the stronger its firmness. Many consumers actually believe it, thinking that the thicker the tempered glass, the better, is this really the case?
What is the thickness of the shower room glass?
Glass is the most important part of shower rooms, the area is large, so the quality of the glass is very important. Of course, the thickness of the tempered glass is also required. Only the qualified thickness of the tempered glass can guarantee the quality of the glass and the consumer’s Safety. Most common glass thickness is 6mm, 8mm, and 10mm,Is thicker glass means safer?
Thicker shower room glass is usually stronger,but because small brand glass factory cannot completely temper the glass, once the glass breaks, There will be sharp fragments, which is easy to cause the danger of scratching the human body. Because the thicker the glass, the worse the thermal conductivity, the greater the possibility of glass bursting, because one of the main reasons for the glass to explode is uneven heat dissipation in various places. Therefore, the explosion-proof glass should be as thin as possible.
The thicker the glass, the heavier the weight. Too much pressure on the hinge will shorten the service life of profiles and pulleys. In particular, low-quality shower rooms use poor quality pulleys. The thicker the glass, the more dangerous it is!
In order to ensure the safety of consumers , fully tempered glass must be strictly used. Compared with float glass , tempered glass has 3 to 5 times higher impact strength.
The general shower room in the market is known as tempered glass. The subtle difference lies in the degree of tempering. Good glass is completely tempered, Pay attention to the glass fragments when buying.
Some consumers beware that the shower room will explode at high temperature due to insufficient thickness of the tempered glass, but in fact, the proportion of this situation is small and has no direct relationship with the thickness of the glass. In addition, the film can reduce the damage of self-explosion to people, even though the costs is higher.
The tempered glass for shower door should be 5-10mm;
The frame of the shower room is made of aluminum alloy, and the wall thickness of the aluminum material is required to be sufficient, and 1.2mm or more is the best;
The sealing strip of the shower room should be magnetic, and the gap should be small, preferably not more than 1mm;
The ball bearings of the shower room should be flexible, so that the door can be opened and closed conveniently, lightly, and has a good hand feeling;
After reading the material of the glass shower door san antonio tx, the next step is to observe the watertightness of the shower room, mainly at the connection between the shower room and the wall, the joint between the door and the door, the hinge, the connection between the shower room and the stone-base basin, and the adhesive strip.
Of course, the most important point is that when choosing a shower room, you should choose a shower room manufacturer complying with the standards. The brand’s product quality is more secure and the after-sales work will be more complete.